Page 4 of 7

Linksys AM300 Quick Configuration

In the Setup screen, complete the following steps:

1 From the Encapsulation drop down menu select RFC 2364 PPPoA.

Note: The page will refresh to include the PPPoA section.

2 Ensure the VPI is set at 8 and the VCI is set at 35 from the Virtual Circuit ID: field.

3 Select the VC radio button from the Multiplexing field.

4 From the DSL Modulation: field select Auto.

5 Enter the username in the Username field.

Refer to the Settings Page on our website for the username format.

6 Enter the password in the Password field.

Refer to the Settings Page on our website for the password format.

1

2

3

4

5

6

Page 4 of 7

Page 4
Image 4
Linksys user manual Linksys AM300 Quick Configuration, Page 4 of