![](/images/new-backgrounds/1120122/12012281x1.webp)
EtherFast Cable/DSL Router with 8-Port Switch
•SNMP Trusted Host. You can restrict access to the Router’s SNMP information by IP address. Enter the IP address or range of IP addresses in the SNMP Trusted Host field. If this field is left blank, then access is permitted from any IP address.
•SNMP
•SNMP
UPnP
•UPnP. UPnP allows Windows XP to automatically configure the Router for various Internet applications, such as gaming and videoconferencing.
•Allow users to make configuration changes. When enabled, this feature allows you to make manual changes while still using the UPnP feature.
•Allow users to disable Internet access. When enabled, this feature allows you to prohibit any and all Internet connections.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes. For further help on this tab, click the Help button.
Log
When you click the Administration tab, you will see the Log screen (see Figure
Log
•Log. To access activity logs, select the Yes radio button. With logging enabled, you can choose to view temporary logs or keep a permanent record using the Logviewer software. Click the No button to disable this function.
•Logviewer IP Address. For a permanent record of these logs, Logviewer software must be used. This software is downloadable from the Linksys website, www.linksys.com. The Logviewer saves all incoming and outgoing activity in a permanent file on your PC’s hard drive. In the Logviewer IP Address field, enter the fixed IP address of the PC running the Logviewer software. The Router will now send updated logs to that PC.
Chapter 7: Using The Router’s
Figure 7-24: Log
35
Log