10/100 8-Port VPN Router

Transparent Bridge

Transparent Bridging is used when you have two large networks that you wish to bridge together. Your network administrator should fill in the information for both network segments, including the range of IP addresses each network includes. When this is selected, the WAN and LAN must be in the same subnect and only one WAN port can be set in Transparent Bridge mode.

Figure 5-10: WAN Connection Type - Transparent Bridge

Heart Beat Signal

Heart Beat Signal is a service used in Australia only. If you are using a Heart Beat Signal connection, check with your ISP for the necessary setup information.

Figure 5-11: WAN Connection Type - Heart Beat Signal

Chapter 5: Setting Up and Configuring the Router

20

Setup Tab - Network