Chapter 2: Connect the Switch
2 . Connect a Category 5 Ethernet network cable to one of the numbered ports on the Switch.. Connect the other end to a computer or other network device..
Connect the Ethernet Network Cable
NOTE: Use Category 5e Ethernet network cables for your Gigabit connections..
3 . Repeat step 2 to connect additional devices..
4 . Connect the supplied power adapter to the power port on the Switch’s side panel.. Plug the other end of the adapter into an electrical outlet..
Connect the Power
WARNING: Make sure you use the power adapter included with the Switch.. Using a different power adapter may damage the Switch..
5 . Power on the devices connected to the Switch.. Each active port’s corresponding LED will light up on the Switch..
Congratulations! The installation of the 10/100/1000 Gigabit Switch is complete.
