COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. Copyright © 2003 Cisco Systems,

Inc. All rights reserved. Linksys is a registered trademark of Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective

holders.

FCC STATEMENT

Every 10/100 Switch has been tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment or devices

Connect the equipment to an outlet other than the receiver’s

Consult a dealer or an experienced radio/TV technician for assistance

EC Declaration of Conformity (Europe)

In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive 93/68/EEC, this product meets the requirements of the following standards:

EN55022 Emission

EN55024 Immunity

Table of Contents

Chapter 1: Introduction

4

The 10/100 Switch

4

Features

4

Chapter 2: Getting to Know the 10/100 Switch

5

Overview

5

Front Panel LEDs

5

Back and Side Panel Features

5

Chapter 3: Connecting the 10/100 Switch

7

Overview

7

Connecting Network Devices

8

Placement Options

9

Appendix A: Specifications

10

Environmental

11

Appendix B: Warranty Information

12

SD205_SD208_SD216-EU-UG-30606NC JL

2

3

Page 3
Image 3
Linksys SD208, SD216 manual Copyright & Trademarks, FCC Statement

SD208, SD216 specifications

The Linksys SD216 and SD208 are powerful and versatile managed switches designed to meet the needs of small to medium-sized enterprises seeking reliable network solutions. Both models offer robust performance, ease of use, and advanced features that help enhance connectivity and optimize data traffic.

The Linksys SD216 is equipped with 16 ports, while the SD208 comes with 8 ports, making them ideal for various network configurations and setups. These switches use Gigabit Ethernet technology, ensuring data transmission speeds of up to 1 Gbps. This high-speed capability allows for seamless operations in environments with high bandwidth demands, such as video streaming, online gaming, and large file transfers.

One of the standout features of both the SD216 and SD208 is their support for Power over Ethernet (PoE). This technology enables the switches to deliver power to connected devices, such as IP cameras, access points, and VoIP phones, eliminating the need for additional power sources and reducing cable clutter. This functionality is particularly beneficial for organizations looking to streamline installations and reduce overall costs.

In terms of management, the SD216 and SD208 support both basic and advanced management features. Users can manage their networks through a user-friendly web interface that allows for easy configuration of VLANs, link aggregation, and port mirroring. These features enhance network performance, improve security, and provide detailed insights into traffic flow.

The switches also incorporate innovative technologies such as Quality of Service (QoS), which prioritizes critical applications and ensures that essential data packets are transmitted with minimal latency. This is especially important for businesses that rely on real-time communication and data transfer.

Moreover, both models are designed with energy efficiency in mind, enabling them to operate with reduced power consumption without sacrificing performance. This eco-friendly approach not only lowers operational costs but also contributes to a smaller carbon footprint.

With their sturdy designs, easy integration, and wide range of features, the Linksys SD216 and SD208 switches provide exceptional value for businesses looking to enhance their network infrastructure. Whether used in an office, a retail environment, or a facility with heavy data usage, these switches deliver reliable performance and scalability to support future growth.