![](/images/new-backgrounds/1156745/1567459x1.webp)
Chapter 2: Getting to Know the Wireless-B Game Adapter
The Game Adapter’s Back Panel
The Back Panel, shown in Figure
Channel Selector The Channel Selector button selects the channel, when using the Game Adapter in Ad- hoc mode, or Infrastructure (IN), when using the Game Adapter in Infrastructure mode, for fast setup.
Reset | The Reset button resets the | ||
| Game Adapter to its factory | ||
| default settings. |
| |
X - II | This switch toggles the | ||
| Network | port | between |
| crossover mode (X) and | ||
| |||
| you are connecting the Game | ||
| Adapter directly to a computer | ||
| or to an Uplink port, choose | ||
|
| ||
Network | The Network port is where you | ||
| will connect the Ethernet net- | ||
| work cable. |
|
|
Power | The Power port is where you | ||
| will connect the power adapter. |
Figure
The Game Adapter’s LEDs
The Game Adapter’s LEDs, shown in Figure
| Figure |
Ethernet | Green. The Ethernet LED will light up when data is trans- |
| mitted over the Ethernet cable. |
Wireless | Green. The Wireless LED will be lit steadily when the |
| Game Adapter is connected to the wired network. The LED |
| will blink when there is network traffic. |
Wireless Channel When using the Channel Selector button for fast setup, this will display the channel on which the Game Adapter is broadcasting (1 - 11) or indicated Infrastructure (IN), when using the Game Adapter in Infrastructure mode, for fast setup.
2 | 3 |