Wireless-G IP Phone
35
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Upgrade
The IP Phone is pre-configured with the correct Download URL and OS Image File entries.
Plug the USB mini-B connector of the included power adapter into the USB mini-B port of the IP
Phone. Then connect the power adapter to a standard electrical outlet.
Select Upgrade to start upgrading the IP Phone’s firmware, or select Return to cancel the upgrade
and return to the Phone Settings menu.
When the upgrade is complete, the IP Phone will automatically power itself off. Wait five seconds,
and then power on the IP Phone.
Figure 4-39: Select
Upgrade
Figure 4-40: Upgrade
NOTE: If the upgrade is interrupted, the IP Phone will revert to its old firmware, and
you can attempt the upgrade again.
Figure 4-41: Upgrade in
Progress
Figure 4-42: Upgrade
Successful