Chapter 3
Advanced Configuration
by MAC address, select MAC Address and enter the MAC address in the field provided. To retrieve this information, click DHCP Client Table.
DMZ > DHCP Client Table
DHCP Client Table
The DHCP Client Table lists computers and other devices that have been assigned IP addresses by the Router. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Expires time (how much time is left for the current IP address). To select a DHCP client, click Select. To update the on‑screen information, click Refresh. To exit this screen and return to the DMZ screen, click Close.
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.
Applications and Gaming > QoS
Quality of Service (QoS) ensures better service to
Applications and Gaming > QoS
QoS (Quality of Service)
Wireless
You can configure the support and No Acknowledgement settings in this section.
WMM Support If you have other devices that support Wi‑Fi Multimedia (WMM) on your network, keep the default, Enabled. Otherwise, select Disabled.
No Acknowledgement If you want to disable the Router’s Acknowledgement feature, so the Router will not
Internet Access Priority
In this section, you can set the bandwidth priority for a variety of applications and devices. There are four levels priority: High, Medium, Normal, or Low. When you set priority, do not set all applications to High, because this will defeat the purpose of allocating the available bandwidth. If you want to select below normal bandwidth, select Low. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority.
Enabled/Disabled To use the QoS policies you have set, keep the default, Enabled. Otherwise, select Disabled.
Category
Select one of the following categories: Applications, Online Games, MAC Address, Ethernet Port, or Voice Device. Proceed to the instructions for your selection.
Summary
This lists the QoS entries you have created for your applications and devices. Refer to Summary, page 22 for more information.
Applications
Application Select the appropriate application. If you select Add a New Application, follow the Add a New Application instructions.
Priority Select the appropriate priority: High, Medium (Recommend), Normal, or Low.
Click Add to save your changes. Your new entry appears in the Summary list.
Add a New Application
QoS > Add a New Application
Enter a Name Enter any name to indicate the name of the entry.
21 |
