Linn 2200, 3200, 4200 Connecting, Connecting to the mains supply, Back panel connectors and switches, 2GAIN, 3AUDIO IN, Important:, 4AUDIO OUT, 6MAINS INPUT, 5Power switch

ENGLISH

Connecting

Connecting to the mains supply

The unit can be connected to any worldwide mains voltage with no adjustment. It incorporates Automatic Voltage Selection (AVS) and the power supply automatically adjusts for the incoming mains supply.

This unit must be earthed. Use the earthed moulded mains lead supplied. Never use an unearthed plug or adaptor.

Back panel connectors and switches

1Speaker outputs

Amplified output for connection to loudspeakers.

2GAIN

For increasing or reducing the gain.

Important:

Only for use when a Linn AKTIV module is fitted to the channel. If no AKTIV module is fitted, always leave set to 3 (default gain setting). If an AKTIV module is fitted, this adjustment can be used to finely tune the AKTIV system to match the room acoustics.

3AUDIO IN

For connection to the incoming audio signal.

4AUDIO OUT

Allows the AUDIO IN signal to be relayed to another amplifier channel or another device (e.g. subwoofer).

For balanced models, due to space restrictions on the back panel, AUDIO OUT is not available on all channels.

5Power switch

For switching the power to the amplifier on and off. Note - this is not a standby switch but cuts the mains supply to the unit.

6MAINS INPUT

See Connecting to the mains supply opposite.

Please see following pages for back panel diagrams showing connectors and switches.

4AKURATE 2200 • 3200 • 4200