6
To fit the fuse, first identify the correct fuse for your local voltage –
400mA anti-surge for 220V and 240V, and 800mA anti-surge for
100V and 120V. Pull open the fuse drawer at the left-hand side of
the mains inlet, insert the fuse in the rear compartment, and close
the drawer.
WARNING: This appliance must be earthed. Use the earthed
moulded mains lead supplied. Never use an unearthed plug or
adaptor.
Important note for UK use
The wires in this mains lead use the following colour code:
• Green and yellow Earth
• Blue Neutral
•Brown Live
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured marking identifying the terminals
in your plug, proceed as follows:
Connect this wire To the terminal
Green and yellow Marked with the letter E, or by the earth
symbol, or coloured green or green and yellow.
Blue Marked with the letter N or coloured black.
Brown Marked with the letter L or coloured red.