Linn LK140, LK85 owner manual Connecting the mains supply, Connecting the audio input

Connecting

The following diagram shows the connections for the rear panel of the LK85/140:

	RIGHT SPEAKER	LEFT SPEAKER		LINE	LINE
MAINS INPUT	OUTPUTS	OUTPUTS	INPUTS		OUTPUTS

VOLTAGE

SELECTOR

SIGNAL DETECTOR

SENSITIVITY

Connecting the mains supply 7

Connect the LK85/140 to a mains supply using the mains cord supplied.

Note that the LK85/140 should be switched off before connecting or disconnecting the plug on the rear panel, or you may generate surges which could damage other components in your hi-fi system.

Connecting the audio input

The LK85/140 provides two audio input sockets, to allow amplifiers to be daisy-chained. Connect the phono cable from your source. This may be a pre-amplifier, multi-room system, or some similar hi-fi component.