Audio Setup
SPDIF Out (Digital outputs only)
Default setting: RRaaww
If you are not using the UNIDISK 2.1’s digital audio
outputs, set to OOffff.
If any of the UNIDISK 2.1’s digital outputs are connected
to a Linn System Controller, other external audio
decoder or other device, set to RRaaww.
If you are recording to an external digital source (e.g.
DAT player), set to LLttRRtt PPCCMM.
LPCM Out (Digital outputs only)
Default setting: LLPPCCMM 9966KK
If any of the UNIDISK 2.1’s digital outputs are connected
to a Linn System Controller, or any other device which accepts
a sampling rate of 96 kHz, set to LLPPCCMM 9966KK.
If the external device does not accept a sampling rate of
96 kHz, set to LLPPCCMM 4488KK.
Notes:
Even when set to LLPPCCMM 9966KKsome discs will only output at the lower rate of 48 kHz.
Audio signals from SACDs and DVD-Audio discs are output as analogue only. There is no
output for these disc types from the digital connectors.
Channel Setup (Analogue outputs only)
Default setting: 55..11 cchhaannnneell
If the UNIDISK 2.1 is being used in a two channel system,
set to 22 cchhaannnneell. (In such a system 5.1 channel material
on SACDs and DVD-Audios will be downmixed to 2
channels.)
If the UNIDISK 2.1 is connected to a Linn System
Controller, or is being used in any other system that has
more than two channels, set to55..11 cchhaannnneell.
Note:
Regardless of the setting Dolby Surround and DTS material is always downmixed to two channels.
Downmix (Analogue outputs only)
Default setting: PPuurreeSStteerreeoo
If you are going to apply Dolby Pro Logic decoding to
the audio signal, set to LLttRRtt.
If you are not going to apply Dolby Pro Logic decoding
to the audio signal, set to PPuurree SStteerreeoo.
Dual Mono (Analogue and digital outputs)
This option is for DVD-Videos which have separate audio
tracks for the left and right channels.
Default setting: SStteerreeoo
To hear only the left channel, set to LL--mmoonnoo.
To hear only the right channel, set to RR--mmoonnoo.
To c ombine the discrete left and right channels, set to
MMiixx--mmoonnoo.
For normal use (i.e. most discs), set to SStteerreeoo.
Midnight Movie (Analogue and digital outputs)
Default setting: OOffff
This option allows you to add compression to the Dolby
Digital audio signal on DVD-Videos. Adding
compression reduces sudden increases in volume, such
as the sound of an explosion.
To add compression, set to OOnn.
English
UNIDISK 2.1 PLAYER
Owner's Manual
11
Setup Menus