Installation
Installation Instructions
Before you begin:
A.This optional antenna can be installed only in the single unit rack mount configuration.
B.Coverage of this antenna is not as good as coverage provided by other
types of antennas because of its close proximity to the rack.
C.When using this optional antenna, mount the assembly as high as possible in the rack.
Remove the rubber plug and mount the BNC feed- through on the right rack mount bracket. Place the rubber grommet on the front side of the bracket and the lockwasher and nut on the back side. Tighten the nut to hold the BNC
Antenna installed
rubber plug
Attach the
Install the 90 degree helical antenna to the front of the BNC
2