Little Wonder Little Wonder manual Remove spark plug wire from spark plug

C.Directions for removing the Fan and reinstallation

1.Remove spark plug wire from spark plug.

2.Remove nozzle assembly.

3 Remove front plate assembly.

4.Remove the bolt that secures the fan to the engine crankshaft.

5.The fan has a 3/4-16 nut welded on the fan hub. Insert a 3/4-16 x 5" long grade 5 (or better) bolt and jack or push the fan off the engine (Little Wonder P/no 910505 pressure screw

is recommended).

6.Replace damaged or worn fan with a new one. If during fan removal the key (#915) was removed from the keyway, reinstall it by applying a few drops of the Loc-Tite 380 instant adhesive (“Black Max” P/N 38050) on the key, and load the key in the keyway of the shaft. (Cure time is approx. 1 min.).

7.Use a new bolt (#910518) and complete fan installation. Insure a secure fit upon re-assembling.

9.