Getting Ready

1. Insert the four AAA alkaline batteries.

Note Removing the batteries while pictures are stored in camera memory will erase the pictures.

2. Insert wriststrap through wriststrap hook.

3. Install the Logitech® camera software using your computer’s CD-ROM drive. Follow the on- screen instructions.

Slide cover to open

Taking Pictures and Videos

1.Press and hold the On/Select button for

one second to turn on the camera. The camera

is ready to take a digital picture.

2. To change any of the camera’s options (e.g., camera mode, resolution, timer, etc.), cycle through the options on the status display by pressing the Mode button. The icon of

the active option will flash. Change it by pressing the On/Select button.

Wriststrap hook

3. When not in use, the camera turns itself off after 30 seconds to conserve battery power.

4.To switch the camera off, press and hold the On/ Select button for two seconds.

2