Getting started with

Logitech® Alert™ 700e

1

2

3

4

5

6

 

™700e/750e

Quick-LogitechstartAlertSystemRequirements

guide

&SupportGuide

!

Legal Warning

Certain uses of security camera products and audio devices, such as employee monitoring, surreptitious viewing and recording of images and/or audio, or the use, publication or distribution of image and/or audio recordings, are prohibited or restricted by country, state and local laws.

Be sure to comply with the laws in your country, state, and locality when using Logitech Alert products and services.

1Run Logitech Alert Commander

Before you begin the installation, read all instructions.
!Logitech Alert Master System required.
Add-On Camera

2Plug in Your Camera

When prompted to connect your camera:

1)Unscrew the hatch from the back of the camera and lift. 1a) Plug the yellow cable connector into the port.

1b) Screw the hatch firmly in place.

1

1

Logitech Outdoor Camera

4

Mounting accessories

2

Camera power supply

5 microSD™ card adapter

3

Power supply cable (yellow tips)

6

System Requirements Guide

2) Unscrew the hatch from the power supply.

2a) Plug the yellow cable into the power supply port.

2b) Screw the hatch firmly in place.

2c) Mount the power supply unit to the wall.

2d) Plug the power connector into the plug slider and plug the power supply into an outlet.

2

1a

1b

2a

2b

2c2d

1)Be sure that Logitech Alert Commander sotware is running on the PC before beginning installation of camera.

Power Supply Install Note

The power supply unit is weatherproof and can be installed outdoors. Use these tips to ensure reliable power supply usage. Make sure the outdoor outlet is weatherproof. Do NOT place on the ground.

1)Do NOT plug the power supply into a surge protector or power strip as they interfere with the cameras. Surge protectors are built-in to the power supply and protect the cameras.

2)Do NOT plug the power supply into the wall so that it lays horizontally or flat.

3)Do NOT mount the power supply upside down. Keep the cable connector port on the bottom.

1

2

• Shortly after connecting, your camera will appear in Alert Commander software. You can now move the camera to its desired location.

Wall/Ceiling Mounting Instructions

The wall mount allows you to easily fasten your camera to a wall, post,

2)

Assemble the mounting arm and attach it to the base.

overhang, or other surface.

3)

Attach the camera to the mounting arm.

 

1) Start by pre-drilling holes into the base surface and then fastening the mouting base with the included screws.

1

23

or

RECOMMENDATION:

Mount the Outdoor Camera under an eave or other overhang so that it is not exposed to direct sunlight.

!

3

4) Avoid direct sunlight.

4

!CAUTION: If left in sunlight, surface may be hot to the touch.