Logitech 700 user manual Adjusting the delay between IR commands, Repeats

22

Repeats

The Repeats are the number of times the remote repeats a command for a device to properly respond to the command. For instance, many devices need longer or shorter command repetitions to respond properly.

Example: Any time I press channel up, my Digital Set Top Box skips two channels at a time.

Adjusting the delay between IR commands

If you find the delay between IR commands is too long, especially when changing channels on your TV, you can change the delay time for a device that is reacting too slowly.

The Harmony 700 uses several different delays to control your devices. For more information on which delay you need to adjust, see Types of delays or speed settings.

To adjust the input delay, from the Harmony Remote Software:

1.Click the Devices tab.

2.Select the device for which you want to apply the change and click Settings.

3.Select Adjust the delays (speed settings).

4.Click Next.

5.Follow the online instructions.

To adjust the inter device delay:

1.Press and hold the Help button on your remote for 5 seconds.

2.When prompted, confirm that you want to enter advanced delay mode by selecting Yes.

3.Select the device you want to adjust the delay for.

4.Select Change Delay.

5.Select Inter Device Delay.

6.Adjust the inter device delay by selecting “+“ to increase or “-“ to decrease.

7.When you are finished, select Done.