User Manual Harmony 1000
Installing the RF Wireless Extender
The extender can be wall-mounted or installed inside the cabinet where your devices are located.
Wall-Mounted
Cabinet
Adding the RF Wireless Extender to the Z-Wave Network
Any time you update the remote, you must add the RF Wireless Extender to your Z-Wave network again.
To add the extender to your Z-Wave network:
1. Take your remote to the RF Wireless Extender you want to add. Make sure the extender is
plugged into a power outlet.
2. Press
Add on the remote when you see a message reminding you to add an RF Wireless
Extender to your network.
3. Press
Connect on the RF Wireless Extender. By pressing Connect you will add the extender to
your Z-Wave network.
v. 1.0 page 13