Operation
The Two Modes of Operation
This fireplace uses both a wall switch and thermostat to control the fireplace.
7
NOTE: Whichever component is operated last controls the fireplace. If you are using the remote and you press any button on the wall switch, the remote is no longer in control of the fireplace until a button is pressed on the remote.
°F | |
TEMP | |
ON | H/L |
| |
| OFF Pilot |
Continuous | |
| MODE |
| SET |
NOTE: Whichever control is
operated last controls the
fireplace.
ON OFF
HI
LO
Manual Mode
In manual mode you can turn the fireplace on and off using either the thermostat or remote. Simply press the “ON” and “OFF” buttons on either the wall switch or remote.
Thermostat Mode
While in thermostat mode, the remote will monitor the temperature and turn the fireplace on and off to meet the desired temperature.
To turn on Thermostat Mode:
Press the “MODE” button on the remote until “ROOM” appears on the LCD display.
To turn off Thermostat Mode:
Press the “MODE” button on the remote until “ROOM” no longer appears on the LCD display.
When the remote is in
thermostat mode the
word "ROOM" will
appear on the remote.
°F | |
TEMP | |
ROOM |
|
ON | H/L |
| |
| OFF Pilot |
Continuous | |
| MODE |
| SET |
Adjusting the Target Temperature of the Thermostat:
Make sure the remote is in thermostat mode. Hold down the “SET” button until the desired temperature is displayed ( “SET TEMP” will be displayed on the LCD, indicating that the thermostat temperature is being set). The thermostat may be set at any temperature between 45° and 99° F. If the desired temperature is missed, simply hold down the button (the temperature will scroll up to 99° then
NOTE: If the fireplace is in thermostat mode, and any button on the wall switch is pressed, the remote will return to manual mode. Simply press any button on the remote to return control of the fireplace to the remote.
WARNING: While in thermostat mode the fireplace will turn on and off to meet the temperature demands of the remote. Do not place any items near the fireplace or conduct service without removing the batteries and disabling the fireplace.
WARNING: If the remote is set to a high temperature the fireplace may remain on for an extended period of time. This may be a concern to those using LP (propane).
© Travis Industries | 4070710 |