Lopi manual Bostonian 564 Wilmington Face

Bostonian (564) Wilmington Face

Black 95400186 Nickel 95400187

2Place the face, face down, on a soft, non-scratching surface. Install the 564 Electric mounting brackets onto the back of the face.

	Remove and
a	discard the
	hinge assembly
	from the face.

Attach the 564 E side bracket. c Use the nuts included with

this kit.

Repeat steps “a” through d “c” for the opposite side.

Before installing the face e verify the lower grill is

centered. Loosen the nuts and adjust if necessary.

Attach the 564 E hinge bracket. Use b the nuts removed earlier.

3Pull the electric fireplace out of the mantel (or built-in location). Attach the cove cover and face following the directions below. Slide the fireplace back into place to complete the installation.

Hang the 564 E cove

cover over the glass - a this keeps light from

exiting the grill opening along the top of the face.

c

Lift the face up slightly, tilt it forward and insert the top hooks until the face locks in place.

b

Tilt the face back slightly and insert the bottom hooks into the slots on the fireplace.

Page 6 of 6 8/17/07 © Travis Industries, Inc.