Operation9
Adjusting the Optional Blower Speed
The blower helps transfer heat from the heater into the room. up to temperature (approximately 10 minutes after starting). instructions on adjusting the blower speed.
It will not turn on until the heater is See the illustration below for
OFF | HIGH | LOW | |
Turn the dial all the | The high position is all the | Turn the dial all the | |
way clockwise. | |||
way | way | ||
| |||
until it clicks off. | without clicking off. |
|
Normal Operating Sounds
Blower Snap Disk
This part can produce a
clicking sound as it turns
the blower on and off.
Gas Control Valve
As the gas control valve is turned on and off you will hear a dull clicking sound. This is the valve
The appliance may creak with change of temperature
Blowers
This heater has optional blowers to push heated air into the room. You will hear the sound of air movement that increases as the speed is increased.
Extinction Pops
It is not unusual, especially on Propane (LP) appliances, to experience a "pop" when the burner is shut off.
Pilot Flame
The pilot flame, which remains on, makes a very slight "whisper" sound.
Normal Operating Odors
This appliance has several areas that reach high temperatures. Dust or other particles on these areas may burn and create an odor. This is normal during
© Travis Industries | 4050812 |