Lorex QDR-TELS 4. Remotely Turning the PC ON/OFF using the QDR-TELS, buttons, ringing time, “ Press password, " Press password, " Press again please, " Computer is off now

4. Remotely Turning the PC ON/OFF using the QDR-TELS

1)Call the premise from a remote location.

2)After the designated number of rings, the module will pick up and request a PIN. If a valid PIN is entered, the QDR-TELS module will prompt to the user the current status of the computer, (On or Off). At this time, the user is presented with the following options.

	Order		when Computer is ON	when Computer is OFF		Remark
1		USER	Connecting telephone.	Connecting telephone.
2			Ringing.	Ringing.		Default : 3 times
3		MSG	“ Press password "	" Press password "
4		USER	Press the password.	Press the password.		Default : 0000
5		MSG	" Computer is running now	" Computer is off now "
			"
6		MSG	" Press 0 to turn-off	" Press 1 to run computer		At this moment,
			computer and Press 9 to	and Press 9 to change		you can press 8 to
			change ringing time ”	ringing time "		change password.
3) With following the Message, turn PC ON(‘0’) or OFF(‘1’) by pressing the number.
	Order		How to OFF of PC		How to ON of PC
7		USER	Press the ‘0’.		Press the ‘1’.
8		MSG	" Computer is turned off. Thank you		" Computer is on now. Thank you ”
			"
9		USER	Disconnecting.		Disconnecting.
4) With following the Message, change the password(‘8’) or ring time(‘9’) by pressing the number.
	Order		Change Password		Change Ringing time
7		USER	Press the ‘8’.		Press the ‘9’.
8		MSG	" Press new password with 4-digit		" Press the number of ringing times ”
			buttons "
9		USER	P		Press the number of ringing times.
			ress new password with 4-digit buttons.
10		MSG	" Press again please "		" It is changed. Thank you ”
11		USER	P		---
			ress again.
12		MSG	" It is changed. Thank you ”		---
13		USER	Disconnecting		Disconnecting

NOTES:

1.In every step, a key must be pressed within 5 seconds of the prompt.

2.Password and / or rings to answer changes will not be saved if the call is terminated during a session.

3.To default the system, press and hold the reset key for more than 3 seconds. (The password will change to 0000, and rings to answer will default back to 3).