MODEL SG620R
Simulated (Dummy) Security Camera
THIS PACKAGE CONTAINS:
1 x Dummy Camera
1 x Ceiling Mount Bracket
1 x Screw and Anchor Pack
Ceiling Mount Bracket | FEATURES |
• Excellent Economical Deterrent
• Flashing Indicator Light Provides Real
Authentic Look*
* Flashing indicator light function requires 2 x ”C” type batteries. Not included.
Dummy Camera | Screw & Anchor Pack |
The Lorex Simulated Security Dome Camera is an affordable and effective theft deterrent device. It looks like a real surveillance camera with its flashing red indicator, imitation lens and dome construction. Mount the simulated security camera in a visible area on a ceiling or wall to deter possible thieves and intruders.
INSTALLING BATTERIES
The Simulated Security Camera requires two “C” batteries (not supplied) if using the flashing red LED. The dome is also effective without the flashing LED as some models of actual Security Cameras do not have a flashing LED.
Cautions:
•Use only fresh batteries of the required size and recommended type.
•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities
1.Remove the four (4) black Holding screws from the Dome Cover, and remove the cover.
NOTE: The simulated security screws are for show only, and are not removable.
2.Remove the two (2) silver screws holding the Simulated Lens to the Base. Remove the Lens component to access the Battery Compartment.
3.Place the batteries in the compartment as indicated by the polarity symbols(+ and
4.Reattach the Lens Compartment to the
base with the two (2) silver screws. Set the switch to ON to start the RED LED blinking. Replace the Dome Cover, and secure with the four (4) black screws.
1.
4.
3. | 2. |
NOTE: Fresh batteries will power the simulated security camera’s indicator for about 4 months (if the flashing LED is left on continuously).
When the indicator dims or stops flashing, replace the batteries