CAMERA COMPONENTS:
2
1
4 
3
1.Camera Lens – Delivers high quality image by using a 1/4” Color CCD Image sensor
2.Plastic Bubble Housing - Smoked acrylic housing protects lens and provides an unobtrusive appearance
3.Camera Input – Connect the extension cable to the back of the monitor
4.Microphone – Picks up sound around the camera
INSTALLATION:
Drywall Anchors
Adapter Plate
Screws | Before installation make sure that: |
| (A) You have the proper lift equipment or ladder to |
| reach the installation |
| (B) Electrical power is not connected to the dome |
| camera and surveillance monitor during |
| installation |
|
|
Base Plate
Please refer to the camera component installation diagram above. To install the dome camera on a ceiling or wall, follow these procedures:
1.Unscrew the base plate from the dome camera
2.Using the 2 screws and drywall anchors mount the base plate and adapter plate on the wall or ceiling
3.Screw the dome camera onto the mounting bracket (base and adapter plate)
4.Connect the 65ft Din cable (included) to the male lead of the dome camera
5.Connect the other end of the 65ft cable to one of the camera inputs on the back of the monitor and power unit
6.Adjust the camera direction for the desired picture view
