1. Package Contents
1 x Mini Switcher Box
1 x Power Adaptor
1 x AV Cable
1 x Velcro Adhesive Strip
2 x DIN Cameras
2 x Camera Stands
2 x 60’ Extension Cables
Switcher Features:
•Easily connects to any TV, VCR or Monitor
•Compact design
•Easy mounting with Velcro strip (included)
Camera Features:
•Durable Metal Camera ideal for indoor or outdoor use *
•Night Vision provides viewing in low light conditions **
•View as well as listen with camera's
microphone.
*Not recommended for direct exposure to rain or snow
**IR illumination range of 8ft. / 2.5m under ideal conditions. Objects at or be- yond this range may be partially or completely obscured, depending on the camera application.
Dimensions:
2. Switcher Controls
1 
2 | 3 |
|
1.SCAN TIME SETTING - Turn to adjust the lenth of time that each camera is displayed onscreen before switching to the next camera. The sequence time can be set between 1~30 Seconds (when in SCAN View Mode).
2.CHANNEL SELECT - Move the switch to change the onscreen view to CH1, CH2 or SCAN View Mode.
3.STATUS INDICATOR LEDs - The Red LED light indicates that the unit is in Scan Mode; The Green LED lights indicate the currently displayed channel (CH1 or CH2).
5 
4 | 6 |
4.DC POWER PORT - Connection port for the Power Adaptor.
5.A/V OUT DIN PORT - Sends the outgoing video/audio signal to a TV or VCR.
6.CH1~CH2 DIN PORTS - Receives the audio and video signal from the Cameras.
NOTE: Test the cameras prior to selecting a permanent mounting location by temporarily connecting the Cameras and Cables to the switcher.
3. Camera Connections
1.Connect the 60ft (18m) DIN Extension cable to the Switcher. Run the cable as desired, and connect the other end of the 60ft (18m) Extension Cable to the DIN Camera (see Setup Diagram below).
NOTE: Cameras with 6 Pin DIN connections draw power from the Switcher. Additional power adaptors are not needed for these cameras.
2.Attach the camera to the supplied stand. Mount the camera stand to the desired mounting surface
NOTE: Confirm that the arrows on the DIN Extension cable are aligned with the Camera Cable and Observation system ports when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function
3.Connect the DIN end of the A/V Cable to the switcher. Connect the RCA end to the corresponding color ports on the TV or VCR:
•Yellow Cable: RCA Video
•White Cable: RCA Audio
4.Connect the Power Adaptor to the switcher.
NOTE: This camera is designed to work with a 9V Power Adaptor ONLY. Use of this camera with any other system may damage the camera and invalidate the warranty.
