
Goto cursor
Used to navigate to the cursor.
1.Move the cursor to a desired location and press Menu.
2.Select Goto cursor and press Enter.
Advanced Mode
Enables advanced features and settings.
The following features are enabled when Advanced mode is turned on:
•Navigation (Enables arrival radius, off- course distance and Bearings setting)
•Alarms (Enables arrival, off course and anchor alarm options)
•NMEA 0183 Output
•Units (Enables distance, speed, depth, temperature, and bearings options)
Standby mode
Lowers power consumption by turning off sonar and the display.
Press the PWR/Light key to access the Backlight dialog.
Select Standby and press Enter.
Press any key to resume normal operation.
NOTE: Leaving your unit in Standby mode when your boat is not is use will run down your battery.
Restore defaults
Resets unit options and settings to defaults.
Basic Operation | 8 |