Lowrance electronic LDT-3003 manual Set Clock Alarm, Set Temperature Alarm

Models: LDT-3003

1 12
Download 12 pages 13.6 Kb
Page 6
Image 6

Press the SET key to change the hours. (Note: A dot

may appear in the upper left corner of the display while you're setting the clock. This can signify ei- ther a.m. or p.m. - it's your choice.) When the hours number is correct, press the MODE key again.The minutes start flashing. Press the SET key until the minutes show the correct time. When the correct time shows, press the MODE key. The clock is now

set.

Set Clock Alarm

To set the clock alarm, press the SET key until the clock alarm similar to the one at right appears. The colon

between the 5 and first 0 begins and the letters "ALM" begin flashing. Now press the MODE key. The "12" begins flashing with the colon. Press the SET key to change the hours. (Note: The dot that appears in the upper left corner of the display signifys ei- ther a.m. or p.m. - make certain you set the alarm the same as the clock.) When the hours number is correct, press the MODE key again. The minutes start

flashing. Press the SET key until the minutes show the correct time. When the correct time shows, press the MODE key. The clock alarm is now set.

You can turn the clock alarm off by pressing the SET key until the clock alarm appears, then press the MODE key once, then press the SET key again. The word "OFF" appears on the display. Press the SET key to exit the set clock alarm.

Set Temperature Alarm

To set the temperature alarm, press the SET key until the alarm screen similar to the one at right appears. The word "WATER" be-

gin flashing at the bottom of the screen. Now press

the MODE key. The letters "ALM" at the top of the screen begins flashing along with "WATER". Press the MODE key to select the first number in the tem- perature. (In this example, the "8". Press the "SET" key to change it.When this number is correct, press the MODE key again. The second number begins flashing. Press the SET key until this number is cor-

rect. Continue this sequence until the temperature alarm

is set. When it is correct, press the SET key to switch to the next tem- perature alarm (T2 and T3).

6

Page 6
Image 6
Lowrance electronic LDT-3003 manual Set Clock Alarm, Set Temperature Alarm