Lowrance electronic LINK-8VHF 1 Installation preparation, 1.1 Checklist, 1.2 Tools needed for installation, not, Note:, before

Check that you have all the following items before starting the installation. Contact your dealer if an item is missing:

•	Link-8 base station, with microphone		•	Handset mic wall hanger, with:
	attached			--	2 self-tapping screws

•	Dust cover			--	2 flat screws
•	GPS connector cable			--	2 plain washers
				--	2 spring washers
•	Speaker connector cable
				--	2 nuts
•	Power supply cable
			•	2 M5 x 32 screws with 2 plain
	(with 7 A fuseholder incorporated)
•	Spare 7 A fuse			washers and 2 nuts (for a recessed
				installation)

•	Mounting bracket, with:		•	Operation Manual

	--	4 self-tapping screws	•	Installation Manual

	--	4 flat screws	•	Warranty Card

	--	4 plain washers	•	DSC Warning Label

	--	4 spring washers	•	Template for flush mounting option

	--	4 nuts	•	Declaration of Conformity document
	--	2 mounting knobs
				(where applicable)

Note: A VHF antenna is not provided by Lowrance. Consult your Lowrance dealer for advice if necessary.

You will need the following tools:

•Power drill (or hand drill) and drill bits

•Philips screwdriver

•Spanner

•Jig saw (for a recessed installation).

6	Lowrance - Link-8 Installation Instructions