20
speeds without adjusting the sensitivity or
other controls. When the X-45 is first turned
on, ASP is enabled. To turn ASP off, press
the menu key repeatedly until the ASP menu
appears. Now press the up arrow to turn it on
or the down arrow to turn it off. The menu will
clear automatically after a few seconds or you
can press the ON/CLEAR key to clear the
screen.
SIMULATOR
The X-45 has a simulator built into it that can
show a simulated bottom signal with fish. All
features of the X-45 work normally when the
simulator is in use. You can change the
range, zoom, and use the alarms as desired.
To use the simulator, press the menu key
repeatedly until the SONAR SIM menu ap-
pears. Now press the up arrow to turn it on.
Repeat the above steps to turn it off, or turn
the unit off and back on again.