Li j.,.. A4jufl
Chart:
SpeedA Turn. On
Fish—ID A Twn On
Chart Cursor
4
Li Tttrp On
RacE 1 'gut
4 I
: More
Remember, you can't use the Fish 1.0. feature
when the X-60 is in the
manual mode. If you turn the Fish ID. feature on when the X60 is in
manual, the micro-computer will turn the automatic feature on. If
you
turn automatic off when the Fish 1.0. feature is on, the Fish 1.0.
feature will be turned off also.
CHART CURSOR
The X-60 has a chart cursor that allows you to pinpoint a target's
depth. The cursor is simply a horizontal line that extends across
the
display from left to right. ;A
depth box at the end of
the
line on the
right side shows the line%2
depth. In the
example at the
top
of the next
page, the cursor
(line) is at 16.1 feet.
To display the chart cursor, press
the MENU key. Now press the
key
adjacent to.the "Tutn On Chart Cursor" label. A screen sirililarto the
one below appears.
Use the
keys adjacent to the up and down
arrow to move the cursor
up or down to the desired depth.
To turn the chart dursor off, press the MENU key. Now
pressthe key
adjacent to the 'Turn Off Chart Cursor" label. The X-60 returns to the
sonar screen without the chart cursor.
NOTE: You can't use the Chart Cursor when FASTRAK is oh.
Yop can see the change on the screen (both on the ffienu and on the
char record) as you press the keys. After
you've made the
adjust-
msnt, press
the key adjacent to theCLEAR key
to erase
the menu.
RFANGE
- Automatic
When first turned on, the X-60 automatically places the boftom
signa!
in. the lower half of the screen. This is called Auto Ranging and is part
of the.automatic function. You cannot change
the
range
while the unit
is in automatic.
RANGE - Manual The X-60
gives you control over the range when it's in the manual
mode. Both the lower and the
upper
limit are adjustable.
To
change
the range, first make certain the
X-60 is in the manual
mode. If necessary, press the AUTO key
to switch to the manual
mode. Next, press
the RANGE key. Two arrows appear
in the lower
left corner of
the
display. These are the range adjust arrows. Press
the
key corresponding to the Shallower or Deeper
arrow to decrease
or increase the
range. The
available rangesare 0-5, 10, 20, 40, 60,
100,150, 200, 300, 500, 800, 1000,1500, 2000, 3000, and 5000 feet.
(Mtric ranges
are 3, 5, 10, 15, 20, 30, 40, 60, 100, 150, 250, 300,
400, 600, 1000, and 1500 meters.) After you've set the desired
range, press the CLEAR key
to erase the range
arrows.
RANGE
ADJUST
MENU
(MANUAL
MODE
ONLY)
20 9
AUTO J
52.OFT ——--U
-C
.C
41
FISH LD. ON
(1
51. Adjust Range