26
Sonar chart with scrolling stopped.
FULL CHART
This shows all echoes scrolling across the full screen. This is the default
page. The bottom signal scrolls across the screen from right to left. The
line at the top of the screen represents the surface. The bottom depth
(as determined by the digital sonar) shows in the upper left corner.
Opening screen, Full Chart page, or mode.
The Fish I.D. feature is turned on.
If the transducer with a built-in temperature sensor is connected, a
digital display for water temperature will also be shown. This
temperature display can be turned on and off. See the later entry on
Temperature Size for off and on instructions
DEPTH RANGE ZOOM (automatic and manual)
When turned on, the unit automatically adjusts the depth
range according to water conditions. When in auto range
mode, it always keeps the bottom displayed in the lower
portion of the screen. You can over-ride the automatic depth
range control and manually select a depth range.
To do this, press MENU until the RANGE ZOOM menu appears. Press the
DOWN ARROW to select MANUAL, then press MENU UP to display the
Fish symbols
Grayline
Bottom signal
Digital depth
Depth range
at bottom of
depth scale
Surface signal
Water Temp
Structure
or cover