Thermal ROR Detector
5351E
•Addressable conventional technology
•Maximum temperature 58°C
•Addressing by means of address module or detector parameterisation
•Remote readout of detector condition
•Function testable with Remote Test Unit ECO1000RTU
Description
The Thermal ROR Detector 5351E reacts to tempera- ture changes within defi ned periods of time, up to a maximum temperature of 58°C. The intelligent evalua- tion of these data allows the early detection of sprea- ding fi res. The detector complies with Class A1R and can be used up to a room height of 7.5m.
Addressable conventional technology is used for alarm transmission to the fi re detection control panel. The detector addressing can be achieved in 2 ways:
•A detector with an Address Module
•An address, which has been stored in the detector
by means of the Remote Programming and Test Unit, is displayed on the Zonal Display Unit S300ZDU.
A test activation of the detector can be carried out using the Remote Test Unit ECO1000RTU. In addition to the test activation of the detector, the Remote Pro- gramming and Test Unit S300RPTU can also be used to set and display the following detector parameters:
•the detector address, and
•the date of the previous maintenance.
The detector can be attached to various detector ba- ses and it can be protected against theft.
Specifications
Operating voltage | Supply through the detector line voltage |
Current consumption | typ. 80µA (quiescent) |
Alarm temperature | 58°C |
Operating temperature | max. +45°C |
Ambient temperature | |
Relative humidity | 5 – 95% (no condensation) |
Dimensions ø × H | 102 × 43 (mm) |
Colour | cream |
Weight | 75g |
Approval | VdS G202014 |
Order number | 242040 |
Order name | Thermal ROR Detector/Conv./300/SS 5351E |
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • | 5351E_DBL_LST_EN_0804.PDF • PAGE 1 |
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED |
|
