LST BC016-1 manual Description, Fire Detection Control Panel, Menu-drivenoperation

Fire Detection Control Panel

BC016-1

•For application in small and mid-sized systems

•Addressable conventional technology with up to 16 detector zones

•Menu-driven operation

•Free parameter setup via PC software or operating field

•Factory settings allow for easy commissioning

•EN 54/VdS-certified

Fire is a permanent threat to life and property. There- fore, immediate response to a fi re is imperative. The main objective of the fi re detection control panel Series BC016 is to alarm and to react in time and, conse- quently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca-

ted within LST premises, thus guaranteeing fl exible and reliable individual solutions.

Using a powerful processor system, display texts, and a large number of integrated functions, the fi re detection control panels Series BC016 ensure topmost effi ciency and speed – prerequisites for saving lives and minimi- zing damage to property.

Description

Already in the basic version the fi re detection control panel BC016-1 is equipped with eight detector lines in conventional technology and, owing to its sophisticated factory settings, is immediately ready for operation. This allows for quick and effi cient application of the product. The control panel can be expanded from 8 to 16 detector zones by means of the Detector Zone Ex- tension MGE8-1.

The addressable conventional technology allows for the connection of automatic and non-automatic fi re detec- tors as well as special detectors with contact output. Unambiguous identifi cation of the activated detector in the event of an alarm facilitates the indication of the detector number on the control panel‘s display. Auxiliary outputs whose parameters can be freely set allow also for the realization and clear display of challenging tasks

in the fi eld of fi re alarm technology.

In addition, one slot each is available for a Fire Brigade Interface and for a Serial Interface Module, respectively. The Fire Brigade Interface FWI016-1 allows for the con- nection of country-specifi c standardized fi re brigade control units or for the expansion of the control panel with additional inputs and outputs for general control tasks.

Via the Serial Interface Module SIM216-1 you can address either a PC for the effi cient and clearly laid out parameterisation of the fi re detection control panel, or a printer. The Serial Interface Module SIM016-3 serves for the connection of INFO-bus devices such as fi re bri- gade control units, remote display and operating pa- nels, remote indication units, etc.

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	BC016-1_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED