LST manual Description, Fire Detection Control Panel, BC016-2with Evacuation Functions

Fire Detection Control Panel

BC016-2 with Evacuation Functions

•For small and mid–sized systems

•Addressable conventional technology with a maximum of 16 zones

•Up to 8 evacuation circuits

•Menu-driven operation

•Free parameter setup via PC software or operating field

•Factory settings allow for easy commissioning

•EN 54/VdS-certified

Fire is a permanent threat to life and property. There- fore, immediate response to a fi re is imperative. The main objective of the fi re detection control panel Series BC016 is to alarm and to react in time and, conse- quently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca-

ted within LST premises, thus guaranteeing fl exible and reliable individual solutions.

Using a powerful processor system, display texts, and a large number of integrated functions, the fi re detection control panels Series BC016 ensure topmost effi ciency and speed – prerequisites for saving lives and minimi- zing damage to property.

Description

Fire detection control panel BC016-2 in design and function corresponds to fi re detection control panel BC016-1. In addition, the BC016-2 has the possibility to operate up to eight alarming devices as evacuation circuits directly via the expanded keypad of the control panel. These evacuation circuits can be actuated either dependent of the alarm situation of the detector zone or by a superordinate danger detection device.

Using the expanded keypad, you can manually activate or deactivate the alarming devices that have been para- meterised as evacuation circuits independent from the alarm situation on the control panel. This way, the user

can manually start or terminate an evacuation alarm on the fi re detection control panel without prior alarm of a

fire detector. In the LED fi eld, the fi rst zone displays are automatically used for displaying the operating conditi- ons of the evacuation circuits.

For security reasons a two-button operation must be performed to activate an evacuation circuit.

The physical outputs for the control and monitoring of the alarming devices are provided by optional modules (e.g., siren connection module SZ58-3).

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	BC016-2_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED