LST BC216-1S manual Description, Fire Detection Control Panel, loopversion of BC216-1

Fire Detection Control Panel

BC216–1S

•1-loop version of BC216-1

•For the application in small systems

•Analogue ringbus technology with unshielded detector cabling

•Menu-driven operation

•Easy commissioning through AUTO setup

•32–bit multiprocessor system

•EN 54/VdS-certified

Fire is a permanent threat to life and property. There- fore, immediate response to a fi re is imperative. The main objective of fi re detection control panel Series BC216 is to alarm and to react in time and, conse- quently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca-

ted within LST premises, thus guaranteeing fl exible and reliable individual solutions.

Using a 32-bit multiprocessor system, the fi re detection control panel Series BC216 ensures topmost effi ciency and speed – prerequisites for saving lives and minimi- zing damage to property.

Description

The fi re detection control panel BC216–1S is designed to be used in small systems with only one ADM loop. It comprises an already completely mounted unit which includes all basic components that are needed for the operation of a 1-loop fi re detection control panel.

Slot 1 is by default equipped with a Loop Interface LIF64-1 for the connection of an ADM loop, slot 2 is inoperable.

The ADM loop principle offers intelligent analogue ring- bus technology with bi-directional data transfer. The loop provides for the software-aided administration of up to 198 physical address points in a maximum of 128 detector zones. Conventional detectors can be integra-

ted into the ADM loop, if required, by means of conven- tional zone modules.

Depending on the respective system, a Fire Brigade In- terface FWI2-1, a Fire Brigade Interface Additional Board FWZ2-1, an LED-Display Field LAB48 as well as further optional componentries can be installed in addition.

Easy parameterisation on the control panel‘s display and operating unit, via a PC keyboard, or by means of a PC software enables you to tailor the control panel to your individual requirements.

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	BC216-1S_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED