LST M500RFE-AS specifications

M500RFE-AS_DBL_LST_EN_0906.PDF • PAGE 1

ABuilding Safety. Building Security.

RF Interface

M500RFE-AS

• ADM loop technology with

System Sensor/200 protocol

• Up to 99 automatic detectors and 98

manual call points can be controlled

• Multi-language operating menu

• High range of radio transmission

• Two frequency bands (868/434MHz)

with automatic change-over

• Channel checked for availability

Description

Speciﬁ cations

Operating voltage 10 – 30VDC

Current consumption external supply (at 24V) max. 80mA

Current consumption from loop 325µA (quiescent)

Range of radio transmission (free air) 300m

Frequency band 868MHz or 434MHz

Ambient temperature -10°C to +55°C

Dimensions W × H × D 210 × 270 × 70 (mm)

Colour white/black

Weight 930g

Approval VdS G208132

Order number 249202

Order name RF Interface/Anal./SS M500RFE-AS

The RF Interface M500RFE-AS serves as a gateway

between radio detectors and a Fire Detection Control

Panel Series BC216. The communication with the con-

trol panel is established via the ADM loop with System

Sensor/200 protocol.

The RF interface can communicate with up to 99 auto-

matic radio detectors and up to 98 manual radio call

points. For each automatic radio detector one detector

is parameterised in the ﬁ re detection control panel, and

for each manual radio call point one module is para-

meterised. The gateway itself occupies one module

address on the loop.

The detectors are conﬁ gured at the RF interface by

means of the automatic learning process. A manual pa-

rameterisation is also possible.

The RF interface is operated and conﬁ gured using

the built-in key pad and the alphanumeric display. The

multi-language operating menu serves for the parame-

terisation as well as for displaying the signal strength

of any individual detector. A 6-digit authorisation code

provides protection against unauthorised access. Three

LEDs indicate the interface conditions operation, alarm

and fault.

The RF interface is designed for indoor surface moun-

ting and is equipped with a dual-isolator, which discon-

nects the loop in case of a short circuit.