Manual Call Point
Series MCP5A
•ADM loop technology with System Sensor/200 protocol
•Available with pane of glass or plastic
•LED indicates activation
•Versions with or without dual-isolator
•Operating instructions by means of standardised symbols
Description
The Manual Call Points Series MCP5A are certifi ed to the standard EN
Two mechanical versions of the detector are available:
•With pane of glass: The detector is activated by pressing in the pane of glass, which breaks into two pieces at a predetermined breaking point. By means of a special key, the detector case can be opened and the pane of glass can be replaced.
•With pane of plastic: The detector is activated by pressing in the pane of plastic without breaking it. By means of a special key, the pane can be put back to the idle position, thereby resetting the de- tector.
Each of these two mechanical versions is available with or without
The activated condition of the manual call point is opti- cally indicated by an LED. The detector address is se- lected with two decadic rotary switches.
The detector is fi tted into a plastic case and can be mounted on a 60mm fl
Specifications
Operating voltage | Supply through loop voltage |
|
Ambient temperature |
| |
Relative humidity | max. 95% (no condensation) |
|
Protection class | IP24 |
|
Dimensions W × H × D | 89 × 93 × 28 (mm) |
|
Colour | fl ame red, RAL 3000 |
|
Weight | 110g |
|
Approval | LPCB 166b/45, 166b/46 |
|
Manual call point with pane of glass, without isolator |
| |
Current consumption | 260µA (quiescent) |
|
Order number | 245040 | A |
Order name | Manual Call Point/Red/200/Glass | |
Building Safety. Building Security. |
| |
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • | MCP5A_DBL_LST_EN_0804.PDF • PAGE 1 |
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED |
|
