LST MGE8-1 specifications Detector Zone Extension, Individual setting of detector zone function

Detector Zone Extension

MGE8-1

•Extends fire detection control panels Series BC016 to 16 detector lines in addressable conventional technology

•Individual detector addressing with optional address module

•Individual setting of detector zone function

•Lines monitored for wire breakage, short circuit, and short to earth

Description

With the Detector Zone Extension MGE8-1 the fi re de- tection control panel Series BC016 can be extended from 8 to 16 addressable detector zones. Up to 64 detectors (addresses) per detector line can be indivi- dually identifi ed with the aid of an address module. In the event of an alarm, the fi re detection control panel indicates the number of the detector that triggers the alarm fi rst.

Depending on the type of detector (manual call point, automatic fi re detector with or without alarm verifi cati- on, fault message contacts as well as contacts for tech- nical messages), the function of the detector zone can be set separately for each detector line. Each input of the Detector Zone Extension is protected against over- voltage and thus provides high system stability.

Specifications

Current consumption at 24V	typ. 32mA (8 zones terminated, without detectors)
Line voltage	typ. 20.0V
Line current	typ. 3.8mA
End-of-line resistance	5.6kΩ or 3,3kΩ (depending on setup)
Line resistance	max. 50Ω per core
Ambient temperature	-5°C to +50°C
Dimensions L × W × H	100 × 65 × 15 (mm)
Weight	80g
Part No.	210110
Order name	Detector Zone Extension MGE8-1

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	MGE8-1_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED