LST NTM2408-1 Power supply housings and accessories, Speci cations

NTM2408-1_DBL_LST_EN_0851.PDF • PAGE 2

ABuilding Safety. Building Security.

Power supply housings and accessories

The wall-mount cabinet NTG24-1 provides space

for the power supply module as well as for the in-

stallation of 2 stand-by batteries with 12V/max.

45Ah, one Relay Module RL58-1 or RL58-2 and

one Multi Module MEA244-1/E. In this case, the

power supply module serves as power supply

for the multi module and the loads that are ac-

tuated via the 4 outputs. Furthermore, via the

inputs of the multi module, fault messages can

be forwarded to the ﬁ re detection control panel.

If required, further modules can be mounted in

the cabinet door.

Thanks to the sophisticated design of the Po-

wer Supply Front Panel NTG24-1CE, it can be

mounted either on a 19“ pivoting frame or on the

mounting plate of a switch cabinet. In both ca-

ses, the optional stand-by batteries are accom-

modated in the interior of the switch cabinet.

In addition to the power supply module, the Po-

wer Supply Front Panel NTG24-1CE can also ac-

commodate a Relay Module RL58-1 or RL58-2.

The Power Supply Housing NTG24-2 provides

space for the power supply module as well as

for the installation of 4 stand-by batteries with

12V/max. 85Ah, one Relay Module RL58-1 or

RL58-2 and one Multi Module MEA244-1/E.

The Battery Bracket BK24-1 is used for installing

stand-by batteries into the Power Supply Hou-

sing NTG24-2 or into a switch cabinet. The solid

sheet steel console can accommodate either

one battery with 12V/max. 85Ah or 2 batteries

with 12V/max. 45Ah.

Power Supply Housing NTG24-1

Protection class IP30

Dimensions W × H × D 442 × 460 × 203 (mm)

Colour grey white, RAL 9002

Weight without installations approx. 7kg

Order number 317030

Order name Power Supply Housing NTG24-1

Speciﬁ cations

All housings are made of powder coated sheet steel. At

the front of the housing, the built-in display and opera-

ting board allows the signalling of the most important

operating conditions as well as the resetting of the in-

ternal buzzer.

The display and operating elements can be labelled in

the respective national language by means of the sup-

plied insertable labelling strips.