LST SM-55000-852 specifications Control Module, monitored, SMÜ-55000-852, Description

Control Module, monitored

SMÜ-55000-852

•ADM loop technology with Apollo/Discovery protocol

•One line-monitored output

•Output line monitored for wire breakage and short circuit

•Setting of module address by means of address switch

•Integrated dual-isolator

Description

The addressable Control Module SMÜ-55000-852 ser- ves for the line-monitored actuation of external devices, such as fi re controls and acoustical or optical signal- ling devices, via the bidirectional communication on the ADM loop with Apollo/Discovery protocol. The external devices are actuated by means of a monitored output.

An external supply voltage is required for powering the external devices.

The address is easily selected by means of a built-in DIL switch. The module has an integrated dual-isolator and is fi tted into a plastic case. Status LEDs indicate the condition of the output and the dual-isolator.

Specifications

Operating voltage	Supply through loop voltage
Current consumption from loop	1.9mA (quiescent)
External supply voltage	max. 32VDC
Output current	max. 1A (resistive or inductive load)
Monitoring voltage	-10VDC
End-of-line resistor	10kΩ
Ambient temperature	-20°C to +70°C
Dimensions L × W × H	150 × 90 × 48 (mm)
Colour	white
Weight	240g
Approval	VdS G201095
Order number	249073
Order name	Control Module/Anal./XP95/Apo SMÜ-55000-852

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	SMU-55000-852_DBL_LST_EN_0804.PDF • PAGE 1
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED