Siren Connection Module
SZ58-3
•Four independent, individually fused siren outputs
•500mA load current per output
•Monitoring of the siren circuits
•LEDs indicate activation and faults of siren circuits
•Activation by means of actuation outputs or external switches
Description
The Siren Connection Module
The signalling devices can be supplied either directly by the fi re detection control panel, or, in case of in-
creased current demand, through an external power supply. The supply of the siren circuits is automatically monitored for undervoltages.
The componentry is equipped with four fault detection outputs which report the fault condition of power supp- ly and siren lines to the control panel.
For each output there are separate LEDs for indication of fault and activation.
The siren connection module is mounted on a bracket inside the housing of the fi re detection control panel.
Specifications
Operating voltage | 21 – 30VDC |
|
External supply voltage for signalling devices | 21 – 30VDC |
|
Current consumption at 24V | 15mA (quiescent, outputs terminated) |
|
Load current per output | max. 500mA |
|
Output voltage, siren circuit quiescent |
| |
Output voltage, siren circuit active | external supply voltage minus approx. 1V |
|
5.6kΩ |
| |
Surveillance current, quiescent state | typ. 240µA |
|
Ambient temperature |
| |
Relative humidity | max. 95% (no condensation) |
|
Dimensions L × W × H | 98 × 74 × 18 (mm) |
|
Weight | 60g |
|
Order number | 223026 |
|
Order name | Siren Connection Module | A |
Building Safety. Building Security. |
|
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • | |
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED |
|