Sounder
WMSOU-xx-P01, WMSOU-xx-P02
•ADM loop technology with System Sensor/200 protocol
•Can be activated with two different tone types, 32 tone types selectable
•Sound level selectable in three steps
– up to 100db(A)
•Low power consumption
•Versions with or without integrated
•Various base types available
Description
The loop powered multitone sounder is fi tted into a round plastic case. It is powered and actuated as a module via the ADM loop with System Sensor/200 protocol.
The sounder can be activated by a Fire Detection Con- trol Panel Series BC216 with two different tone types, depending on the parameter setup. One of 32 different tone type combinations can be selected with a DIL- switch. The following tones are available, for example:
•Continuous tone 660Hz,
•Emergency signal according to DIN 33404,
•Slow whoop tone according to NEN 2575,
•Alternating tone 800/970Hz, and many more.
The sound level can be selected in 3 steps. The address of the sounder is selected with two decadic rotary swit- ches located at the bottom of the device.
The sounder is designed for indoor and outdoor wall mounting. For this purpose a special base is needed. Various base types for protection classes IP24, IP44 or IP65 are available, depending on the application. An optional mounting plate can be supplied for surface mounted cabling.
The sounder is available in two colours and two diffe- rent versions: With or without integrated
Specifications
Operating voltage | Supply through loop voltage |
Sound level | typ. 82dB(A) at 1m distance (low) |
| typ. 90dB(A) at 1m distance (medium) |
| typ. 96dB(A) at 1m distance (high) |
| max. 100dB(A) at 1m distance (high) |
Ambient temperature | |
Dimensions ø × H | 115 × 68 (mm) (incl. base LPBW) |
Weight | 204g |
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • | |
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED |
|
