Chapter 3: Additional Features Efficient Networks® 5800 Series
User Reference Guide
Page 3-24 Efficient Networks®
Command Line Interface
The Command Line Interface (CLI) is used for advanced router configuration. It
can be accessed through a connection between your workstation and the console
port of your router. Use a straight through (red label) cable and a DB9 adapter to
connect your router to your PC serial port. Boot both systems and open a
connection using your VT 100 terminal emulation program. Use the following
port settings:
•Baud Rate: 9600
•Data bits: 8
•Parity: None
•Stop bits: 1
•Flow control:Hardware
Note: The console port is disabled if Dial Backup is enabled.
For specific configuration information and instructions, please refer to the
Command Line Interface Reference Manual included on your CD-ROM.
Figure 3-12: HyperTerminal Command Line Interface Screen