To program Hold for normal Hold (that is, the feature which allows the user to put a call on hold)
1. Press the Program button; then press Flash ; then press Hold .
2.Press Hold again; then press Flash again; finally, press the Program button again.
Locking and Unlocking the Programmable Dialing Buttons
The system manager can lock the 10 programmable dialing buttons so the numbers or features assigned to these buttons CANNOT be changed.
To lock the Programmable Dialing buttons so that their assignment cannot be changed
1. Press the Program button; then press Flash .
2.Press “752 (RLC)” on the dial pad.
3. | Press Flash again; then press the Program button |
| again. |
To unlock the Programmable Dialing buttons | |
1. | Press the Program button; then press Flash . |
2.Press “766 (RNO)” on the dial pad.
3. Press Flash again; then press the Program button again.
— FCC Information —
FCC REGISTRATION AND REPAIR INFORMATION
Your new Lucent Technologies telephone has been registered with the Federal Communications Commission (FCC). This product complies with standards in Part 68 of the FCC rules. The FCC requires us to provide you with the following information:
CONNECTION AND USE WITH THE NATIONWIDE TELEPHONE NETWORK
The FCC requires that you connect your telephone equipment to the nationwide telephone network through a modular telephone outlet or jack. The modular telephone outlet or jack to which the telephone must be connected is a USOC RJ11C or RJ11W. The telephone may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.)
INFORMATION FOR THE TELEPHONE COMPANY
Upon request of your local telephone company, you are required to provide them with the following information: A.) Your phone number. B.) The telephone equipment’s FCC registration number and ringer equivalence number (REN). These numbers are on the back or bottom of your telephone equipment. The REN is useful to determine how many devices you may connect to your telephone line and still have them ring when your telephone line is called. At most, but not all areas, the sum of all REN’s should be 5 or less. You may want to contact your local telephone company.
REPAIR INSTRUCTIONS
If it is determined that your telephone is malfunctioning, the FCC requires that it not be used and that it be unplugged from the modular outlet until the problem is corrected. Repairs can only be made by the manufacturer or its authorized agents or by others who may be authorized by the FCC.
RIGHT OF THE TELEPHONE COMPANY
If telephone equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service. If possible, they’ll notify you before they interrupt service. If advance notice isn’t practical, you’ll be notified as soon as possible. You’ll be given the opportunity to correct the problem, and you’ll be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your Lucent Technologies product. If such changes are planned, you will be notified.
INTERFERENCE INFORMATION 
!
WARNING:
Some telephone equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. These telephones have been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient the receiving television or radio antennae where this may be done safely.
•To the extent possible, relocate the receiver with respect to the telephone equipment.
•Where the telephone equipment requires ac power, plug the telephone into a different ac outlet so that the telephone equipment and receiver are on different branch circuits.
—Warranty Information –
LUCENT TECHNOLOGIES WARRANTY INFORMATION
WHAT IS COVERED: All terms and conditions specified in your agreement with Lucent Technologies apply.
TO GET WARRANTY SERVICE FOR YOUR TELEPHONE: Call the Lucent Technologies Customer Service Support Operations
5
