Lucent Technologies MDW 9031DCP manual Preselecting a Line or Button

Models: MDW 9031DCP

1 12
Download 12 pages 23.19 Kb
Page 11
Image 11

Quick Reference

Preselecting a Line or Button

After Line Preselection is enabled, proceed as follows:

1If the display is blank, press ".

2If necessary, press " to move the Selection rectangle.

3Press ' corresponding to the line or button you want.

4Press O to access the line or button.

Accessing Certain Voice Mail Systems with a DEFINITY System

Note: This section only applies to the MDW 9031 Pocket Phone.

After dialing into some voice mail systems (for example, Octel 200/250, 300/350), the MDW 9031 Pocket Phone may not provide touch tones in order to access the voice mail system prompts.

If you experience this problem after dialing into your voice mail system, press the F e at/P button twice. After pressing the Fe at /P button twice, your Pocket Phone will generate touch tones and you will be able to navigate within your voice mail system. When you end your call to your voice mail system, or press any non-dialpad button on your Pocket Phone (that is, Conf, Trans, Hold, Redial, Mute), your MDW 9031 will stop generating touch tones behind the voice mail system. You will need to re-enter

Fe a t/P whenever you dial into these voice mail systems or after you have pressed a non-dialpad button.

MDW 9031/9031DCP Wireless Pocket Phone Quick Reference

503-801-165

Issue 2 February 1999 7

Page 11
Image 11
Lucent Technologies MDW 9031DCP Preselecting a Line or Button, Accessing Certain Voice Mail Systems with a Definity System