Lucent Technologies manual NavisAccess DSL EMS Software Operations and Specifications

NavisAccess™ DSL EMS Software Operations and Specifications

On-screen Displays

-Threshold monitoring – monitors individual lines for threshold crossing, including parameters affecting line quality

-Fault monitoring – provides screen-based view of every aspect of your Stinger® DSL network

-Inventory management and spares planning – easy-to-use screens and tools provide virtual views of each Stinger® DSLAM device on the network

Reporting

-Versatile reporting – customized reporting available to monitor device status, device chassis, DSL resources and events

-Multi-level security for network-wide control – ability to segregate security program based on network elements and create multiple level security controls to restrict access based on different feature combinations

Enhanced Device Management

-Monitors the state of network element (NE) connections

-In case of loss of management connection, notifies local operator and sends a trap to a higher order OSS

-After communication link is restored, recovers traps that were generated on the NE during the period of outage and forwards recovered traps to higher order OSS

Event and Fault Management

-SNMP Trap forwarding to higher order OSS

-Optional integration with Navis® Network Fault Management (NFM) software

-Hierarchical network map - Indication of highest severity alarms on network map

-User acknowledged/cleared alarms

-Auto-clearing of alarms based on user-specified notifications

-Audit trail of alarm processing

-Advanced GUI for high fault visibility

Advanced Thresholds

-Threshold monitoring parameters detect:

•Loss of frame seconds

•Loss of link seconds

•Loss of power seconds

•Loss of signal seconds

•Errored seconds

Configuration Management

-Device configuration and software management – automates routine, error-prone tasks involved in configuring network devices and loading new versions of software across a large network

-Physical view of the Stinger® DSLAM allows:

•Discovery of trunk and Control Module (CM) sparing configuration

•Recognize Line Protection Module (LPM) LPM-R (redundancy supporting), LPM-RP (port level or enhanced redundancy supporting) IRM (Interface Redundancy Module) or CLT (Copper Line Test Module)

•Standby versus Active CM indication

•Trunk module switchover indication

•Line-under-test indication

•Redundant line switchover indication

•Associated event display filtered for device being viewed

•Initiate loop tests and view the results in minutes

Scalability

-Distributed system architecture allows for high scalability, supporting more than 500,000 DSL lines.

Service and Support

Backed by Lucent Worldwide Services for industry-leading service and support

Hardware

NavisAccess™ DSL hardware specifications vary based on number of DSLAMs to be managed, number of operators logged into NavisAccess™ servers, availability of WAN bandwidth, etc. These specifications are made available based on your specific requirements.

Release 7.3 Specifications

-True Access® Operating System 9.4-185.2, 9.3-170.3

-48port ADSL MRT 19”

-Support for Connection Admission Control (CAC) feature

-Support for Reliable Trap delivery - to Stinger® Access Concentrator and Navis® NFM

Supported Stinger® Products

-Stinger® FS DSL Access Concentrator

-Stinger® FS+ DSL Access Concentrator

-Stinger®LS DSL Access Concentrator

-Stinger® RT DSL Access Concentrator

-Stinger® MRT DSL Access Concentrator

2