Lumex Syatems LF1050 guide

b. Attach the top of the Actuator to the bracket on the Boom and insert pin.

6.Attach the spreader bar to the boom and insert pin.

	7. Insert the Actuator plug into the	8. Insert the pendant plug into the
		Control Box.
	Control Box.

NOTE:Prior to using the LF1050, charge the batteries overnight. (CHARGE FOR AT LEAST 10 HOURS BUT NOT MORE THAN 12 HOURS)

LF1050 Patient Lift Owner’s Manual

9

Image 9

Lumex Syatems LF1050 owner manual

Contents

Patient Lift Page Contents Special Notes Introduction Safety Precautions MaintenancePage Handling Procedures FeaturesUnpacking Inspection Assembly Instructions Page Operating Instructions Preparation Before LiftingLift and Transfer From Bed Transfer From Wheelchair Know What The Battery Indicator Lights Are Telling You Checking the BatteryCharging the Batteries Important Notes on Charging Cleaning Care and MaintenanceLubrication Checking for damage and wear Maintenance Schedule Symptom Possible Cause Action Troubleshooting Specifications Warranty Shall be Limited to Such Limited Warranty Foregoing Warranty is Exclusive Page A., Corporate Headquarters