Lumiscope 1143 instruction manual Deleting the Memory

3.Press button ‘M’ again, the device displays ‘01’; then after 1-2 seconds the latest reading will display as in Fig.9;

Fig.9

4.Press button ‘M’ again, the device displays ‘02’; then after 1-2 seconds the second-to-the-last reading will display.

DELETING THE MEMORY

To clear memory: After a measurement is finished or when the device is in standby mode, press and hold button ‘M’ for at least 5 seconds. The device will display ‘Clr’, which means the stored reading is deleted as in Fig.10.

Fig.10

17