Rev. 10/05
FE-CSMTS Ford Escaspe In-Dash Mount
Installation Instructions
Lund Industries, Inc is pleased to announce its
Installation Instructions
1.Remove the factory radio.
2.Remove the glove box door.
3.Route radio cables down to the glove box.
4.Install radio relocate bracket in glove box. Secure bracket with (4) screws.
5.Plug in radio connectors & snap radio into bracket
6.Install (2) “U” clips into radio slot and secure by tightening bolts provided. “U” clips attach to the black plastic around radio opening. Make bolts secure but do not
Note: Separating the face plate from the mounting bracket will make monitor installation easier.
7.Mount monitor to face panel securely.
8.The plastic handles on the side of the mount allow the display to tilt up and down and swivel left and right for best viewing.
SPECIALISTS IN EMERGENCY VEHICLE PRODUCTS SINCE 1978 • DESIGN, MANUFACTURING, DISTRIBUTION AND INSTALLATION