Set-up of BW-1

If you connect the BW-1’s to a Lyngdorf product with DSP and/or RoomPerfect product you can set-up the speakers really easy using the “Lyngdorf Speaker Config”. Please go to www.lyngdorf.com, choose your Lyngdorf product and follow the installation instructions.

If you don’t have a Lyngdorf product with DSP, or choose not to use the special software to set-up the BW-1’s, we recommend you set the cut-off frequency at around 300Hz. But depending on you spea- kers and room, the cut-off frequency can easily vary from 200-500Hz. Try experimenting to get the best sound.

Level

Adjust the level of the BW-1s to match the sound level of your main speakers.

If applying RoomPerfect you can set the volume of the BW-1’s a few dB to loud before mak- ing the RoomPerfect calibration. RoomPerfect will then lower the bass to an appropriate level.

Spikes

After the initial placement of the speaker, you might consider using the supplied metal point spikes to give them optimal support. To fix them on, we recommend that you gently lay the speaker on it’s back and screw in all four spikes together. Before you do this, however, be sure to place a couple of thick towels or similar underneath the side of the speaker. This will prevent accidental scratching to the surface of the speaker.

After screwing in the spikes, gently bring the speaker to its vertical position. Once upright simply adjust the spikes to give optimal support. Using the spikes will give the very best support and sound quality. If you want to spare your floor surface from being punctured however, you can use the supplied rubber spikes instead.

Whichever option you choose, avoid “walking” the speakers if you need to move them to a different position… especially on hard wood floors!

RoomPerfect

If you have a Lyngdorf product with RoomPerfect you can now run the program.

Cleaning

Please use a dust-free cloth to clean the speakers. It is also possible to use a slightly damp cloth for more stubborn marks.

Under no circumstances should you use any kind of cleaning agent on, or in close proximity to, these speakers.

Specifications

Product

BW-1

Woofer/midrange driver

10”

Frequency response

25 - 800 Hz

Sensitivity (2.83V/1m)

90dB

Nominal Impedance

4 Ohm

3

Page 2 Page 4
Page 3
Image 3
Lyngdorf Audio owner manual Set-up of BW-1, Level, Spikes, RoomPerfect, Cleaning, Specifications
Page 2 Page 4

BW-1 specifications

Lyngdorf Audio has established itself as a pioneer in high-fidelity audio equipment, and the BW-1 is a prime example of their innovative approach to sound reproduction. Designed to deliver unparalleled audio experiences, the BW-1 bookshelf speaker combines elegant aesthetics with advanced technologies to meet the demands of discerning audiophiles.

One of the standout features of the Lyngdorf Audio BW-1 is its exceptional build quality. Crafted with meticulous attention to detail, each speaker is housed in a sturdy enclosure that minimizes unwanted resonance. This design ensures that sound remains pure and uncolored, allowing listeners to appreciate music as it was intended by the artists.

The BW-1 is equipped with a custom-designed driver that delivers an impressive frequency response. This driver features a lightweight diaphragm that enables quick transient response and reduces distortion. As a result, the BW-1 produces crisp highs and deep lows, creating a well-balanced soundstage that fills any room. With a frequency range that extends from 40 Hz to 30 kHz, the speaker is capable of reproducing a broad spectrum of musical genres with remarkable fidelity.

Lyngdorf Audio has also incorporated advanced technologies into the BW-1 to enhance its performance. The speaker features a unique waveguide design that optimizes sound dispersion. This ensures that listeners can enjoy a consistent audio experience, whether they are sitting directly in front of the speakers or off to the side. The waveguide helps to create a more natural listening environment, making the BW-1 suitable for both casual listening and critical listening sessions.

Another key characteristic of the BW-1 is its versatility. The speaker can be easily integrated into various audio setups, from stereo systems to surround sound configurations. It pairs seamlessly with other Lyngdorf products, as well as third-party equipment. This flexibility allows users to customize their audio experiences based on their preferences and room acoustics.

Additional features of the BW-1 include a range of finishes to match any decor, making it not just a high-performance speaker but also an attractive addition to any living space. The speaker's compact size enables it to fit comfortably on shelves or stands, making it an excellent choice for those with limited space.

In summary, the Lyngdorf Audio BW-1 bookshelf speaker represents a harmonious blend of advanced technologies and aesthetic appeal. With its superior sound quality, versatile integration options, and elegant design, the BW-1 is an ideal choice for anyone looking to elevate their audio experience. Whether you're an audiophile or a casual listener, the BW-1 promises to deliver an immersive listening experience that truly brings music to life.
Top Page Image Contents